Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Rio
    4. : Removing the Kia Rio door panel

Kia Rio - Video tutorial

Model: Kia Rio MK 3, UB - Years 2011-2017
Part: Door panel
Operation: Removing the Kia Rio door panel

In this video we will see how to remove the interior door panel of the Kia Rio. First we take something pointed like a screwdriver and remove the square plastic cap that is located in the opening handle: unhook it and unscrew the screw underneath. We then remove the handle frame and repeat the same operation in the door socket: there is another cap to remove and another screw to unscrew. Now we unscrew all the side screws of the panel and finally with a plastic lever we try to unhook the panel gently and extract it!


Posted on 9 December 2023 by ScegliAuto



How to replace the door handle of a Kia Rio
Kia Rio (2011-2017 / MK 3, UB) The replacement of the internal door handle of a Kia Rio follows a fairly simple procedure that can be done independently. When we proceed with the r
How to remove the rear door panel on Kia Rio
Kia Rio (2011-2017 / MK 3, UB) Let's see how to remove the rear door panel (left side) on Kia Rio. We disconnect the battery terminals in the engine compartment, with a screwdriver
Removing the Kia Rio tailgate panel
Kia Rio (2011-2017 / MK 3, UB) In today's video tutorial we will see how to remove the tailgate panel on a third series Kia Rio, following these simple steps. First of all we open

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos