Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Handle on a Kia Rio

Model: Kia Rio UB, MK 3 - Years 2011-2017
Part: Handle

Replacing the internal door handle on a Kia Rio follows a straightforward procedure that you can do yourself. When proceeding with the removal of the door panel, first disconnect the vehicle's battery. Start by opening the door and removing the screws that secure the panel; these screws are located on the outer side and behind the opening handle cover. Continue by removing the outer panel and the inner rubber. Also, remove the screw that connects the handle and unscrew everything, as shown in the video. Disconnect the connector and replace it with a new handle. Finally, reconnect and reassemble everything as done previously.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the 2017 Kia Rio
How to Remove the Door Panel of the 2017 Kia Rio
Kia Rio (2011-2017 / UB, MK 3) Removing the front passenger door panel of the 2017 Kia Rio is a simple and quick task that you can do yourself. To carry out the removal, you will n…
Removing the Door Panel on a Kia Rio
Removing the Door Panel on a Kia Rio
Kia Rio (2011-2017 / UB, MK 3) In this video, you will learn how to remove the inner door panel of a Kia Rio. First, take a sharp tool like a screwdriver and remove the square plas…
How to Remove the Rear Door Panel on Kia Rio
How to Remove the Rear Door Panel on Kia Rio
Kia Rio (2011-2017 / UB, MK 3) To remove the rear door panel (left side) on a Kia Rio, disconnect the battery terminals located in the engine bay. Using a screwdriver, unscrew the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos