Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Rio
    4. : Removing the door panel for replacement

Kia Rio - Video tutorial

Model: Kia Rio MK 3, UB - Years 2011-2017
Part: Door panel
Operation: Removing the door panel for replacement

The tools needed for this operation are: a flat blade screwdriver, a Phillips screwdriver, a Torx wrench and a spatula. Remove the handle cover and unscrew the sealing screws. Also unscrew all the panel screws and with the help of the spatula gently remove the panel along the edges which must be carefully removed upwards. Carefully remove the electrical contacts, disconnecting the connectors, being careful not to tear them. Reassemble the new panel starting with the connection of the electrical cables. Position the panel upwards and then push it down until it fits into place. Put the screws back.


Posted on 13 July 2023 by ScegliAuto

This video is currently unavailable


How to replace the door handle of a Kia Rio
Kia Rio (2011-2017 / MK 3, UB) The replacement of the internal door handle of a Kia Rio follows a fairly simple procedure that can be done independently. When we proceed with the r
How to remove the rear door panel on Kia Rio
Kia Rio (2011-2017 / MK 3, UB) Let's see how to remove the rear door panel (left side) on Kia Rio. We disconnect the battery terminals in the engine compartment, with a screwdriver
Removing the Kia Rio door panel
Kia Rio (2011-2017 / MK 3, UB) In this video we will see how to remove the interior door panel of the Kia Rio. First we take something pointed like a screwdriver and remove the squ

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos