Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Kia Picanto?

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

The tyre pressure warning light that appears on the instrument cluster of the Kia Picanto can be reset by inflating the tyres to the recommended pressure value, which is indicated on the sticker affixed to the driver's door pillar. Once all the tyres are at the correct pressure, turn on the ignition by inserting the key into the ignition switch: at this point, wait a few seconds for the light to disappear.

If it remains illuminated, drive for a few miles to allow the sensors to read the new pressure values.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on the Kia Picanto?
How to Reset the Tyre Pressure Light on the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) To reset the tyre pressure light on the Kia Picanto, inflate all tyres to the correct pressure. This is indicated on a sticker affixed inside the dri…
How to reset the tyre pressure warning light on the Kia Picanto?
How to reset the tyre pressure warning light on the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) The tyre pressure warning light illuminates on the instrument panel of the Kia Picanto when at least one of the four tyres is under-inflated. To turn…
How to reset the tyre pressure warning light on the Kia Picanto 3
How to reset the tyre pressure warning light on the Kia Picanto 3
Kia Picanto (2018-2026 / MK 3, JA) In this brief guide, follow the main instructions to reset the tyre pressure monitoring system (TPMS) warning light on the second and third generatio…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos