Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Kia Picanto?

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure light on the Kia Picanto, inflate all tyres to the correct pressure. This is indicated on a sticker affixed inside the driver’s side door pillar.

Once all tyres are at the correct pressure, to reset the light, turn on the ignition and hold down the SET button with the tyre pressure light icon. The light will begin to flash, and when it turns off, you can release the button.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Adjust and Reset the Tyre Pressure Warning Light on a KIA Picanto
How to Adjust and Reset the Tyre Pressure Warning Light on a KIA Picanto
Kia Picanto (2011-2018 / TA, MK 2) When you are inside your KIA Picanto and you turn on the ignition, if you see a steady yellow warning light with an exclamation mark (tyre pressure w…
How to reset the tyre pressure warning light on the Kia Picanto 3
How to reset the tyre pressure warning light on the Kia Picanto 3
Kia Picanto (2018-2026 / MK 3, JA) In this brief guide, follow the main instructions to reset the tyre pressure monitoring system (TPMS) warning light on the second and third generatio…
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) This guide will show you how to reset the tyre pressure warning light on the Kia Picanto in simple and quick steps. First, check the pressure of your…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos