Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Tire pressure warning light

This guide will show you how to reset the tyre pressure warning light on the Kia Picanto in simple and quick steps. First, check the pressure of your tyres; ensure all four tyres are at the recommended operating pressure, indicated on a label on the front door pillar or in the vehicle's user manual. Next, get inside the car and turn on the ignition; you will see that the TPMS light will remain illuminated for about 10-15 minutes before turning off!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Kia Picanto
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
Kia Picanto (2018-2026 / MK 3, JA) Here are the steps to reset the tyre pressure warning light on the Kia Picanto; before resetting the TPMS sensors, ensure all four tyres are at the c…
How to Adjust and Reset the Tyre Pressure Warning Light on a KIA Picanto
How to Adjust and Reset the Tyre Pressure Warning Light on a KIA Picanto
Kia Picanto (2011-2018 / TA, MK 2) When you are inside your KIA Picanto and you turn on the ignition, if you see a steady yellow warning light with an exclamation mark (tyre pressure w…
How to reset the tyre pressure warning light on the Kia Picanto?
How to reset the tyre pressure warning light on the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) The tyre pressure warning light illuminates on the instrument panel of the Kia Picanto when at least one of the four tyres is under-inflated. To turn…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos