Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Kia Picanto 3

Model: Kia Picanto MK 3, JA - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

In this brief guide, follow the main instructions to reset the tyre pressure monitoring system (TPMS) warning light on the second and third generation Kia Picanto. Before performing the reset, ensure all four tyres are inflated to the correct operating pressure.

Next, get inside the vehicle and turn on the ignition. Press and hold the "set" button located on the driver's side, to the left of the steering wheel.

Wait a couple of seconds until the tyre pressure warning light turns off!


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Adjust and Reset the Tyre Pressure Warning Light on a KIA Picanto
How to Adjust and Reset the Tyre Pressure Warning Light on a KIA Picanto
Kia Picanto (2011-2018 / TA, MK 2) When you are inside your KIA Picanto and you turn on the ignition, if you see a steady yellow warning light with an exclamation mark (tyre pressure w…
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
Kia Picanto (2018-2026 / MK 3, JA) Here are the steps to reset the tyre pressure warning light on the Kia Picanto; before resetting the TPMS sensors, ensure all four tyres are at the c…
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) This guide will show you how to reset the tyre pressure warning light on the Kia Picanto in simple and quick steps. First, check the pressure of your…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos