Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Spare Wheel on a Kia Carnival

Model: Kia Carnival MK 4, KA4 - Years 2021-2026
Part: Wheel

Let's see where the spare wheel is located on the Kia Carnival and how to lower it. It is located under the floor, at the foot level of the second row passenger seat, behind the passenger (on the right side). To access it from the outside, look for a square plastic cover, which you can open using a small flat screwdriver. Inside, you will find the control to lower the wheel. Insert the extension with the toothed wheel into the hole under the cover. Turn the tool counterclockwise to loosen the steel cable holding the wheel. Continue unscrewing until you feel the wheel touch the ground. To mount the flat wheel, turn the handle clockwise to raise it; replace the plastic cover and tools.

Posted on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the wheel with the spare one of the Kia Carens
How to replace the wheel with the spare one of the Kia Carens
Kia Carnival (2021-2026 / MK 4, KA4) The following steps will show us how to disassemble and replace the wheel with the spare one of the Kia Carens, following the instructions below. Fir…
Where are the fuses located in the Kia Carnival?
Where are the fuses located in the Kia Carnival?
Kia Carnival (2021-2026 / MK 4, KA4) Each fuse in the Kia Carnival is contained within one of the two fuse boxes installed in the vehicle: in this type of vehicle, you can find two boxes…
Where is the fuse box located in the 2025 Kia Carnival?
Where is the fuse box located in the 2025 Kia Carnival?
Kia Carnival (2021-2026 / MK 4, KA4) The 2025 Kia Carnival will feature two fuse boxes inside. The fuse boxes will be installed inside the cabin and outside. The fuse box inside the cabi…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos