Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a 2012 Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Clock

To set the clock on the second-generation Kia Picanto, first ensure that the radio is turned off. Find the "setup" or "clock" button: on the model in the video, there is a specific button for the clock. Press and hold the button for a few seconds. The hours will start flashing on the display. Use the tuning knob (the one used to change stations) to adjust the value: turn it clockwise to increase and counterclockwise to decrease. Press the button again to confirm the hours, and the display will switch to minutes, which you will adjust using the same method. Press the button again to confirm.

Posted on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the Kia Picanto?
How to Set the Clock on the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) To set the clock on the Kia Picanto, turn on the instrument panel by turning the key in the ignition: once the panel is on, press the SETUP CLOCK but…
How to adjust the clock of the Kia Picanto
How to adjust the clock of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Today we will illustrate the steps to be taken independently to set the time on a 2012 Kia vehicle. The steps to adjust the clock on the Kia Picanto …
How do you set the clock on the Kia Picanto?
How do you set the clock on the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) The clock of the Kia Picanto can be adjusted by turning on the instrument panel, turning the ignition key in the corresponding slot: once the panel i…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos