Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The TPMS warning light of the Kia Syros

Model: Kia KIA Various
Part: Tire pressure warning light

Video tutorial

TPMS stands for Tire Pressure Monitoring System. When you start the engine and there are no problems with the tire pressure, the light comes on and then goes off. If the tire pressure is low, the light comes on and a message appears indicating that the pressure level needs to be adjusted.

Today we will explain how to act if the light comes on in a Kia Syros car. If the light comes on steadily, it is necessary to replace the wheel as it may be defective. The spare wheel is located along with the jack and other tools inside the trunk, under the floor.

If the light flashes, the problem is with the sensor and it needs to be checked. It is important to monitor the tire pressure to maintain safe driving.


Posted on 1 March 2025 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Kia K3
How to Reset the Tyre Pressure Warning Light on the Kia K3
Kia KIA Various In this brief guide, we will see the steps to reset the tyre pressure warning light on the Kia K3; before resetting the TPMS sensors, ensure all four…
How to Reset the TPMS Light on a Kia
How to Reset the TPMS Light on a Kia
Kia KIA Various Resetting the TPMS light, which relates to tyre pressure, on a Kia is a straightforward process you can do yourself. It is important to adjust the ty…
How to Reset the TPMS Light on a Kia Vehicle
How to Reset the TPMS Light on a Kia Vehicle
Kia KIA Various Today, learn how to reset the TPMS light related to tyre pressure on a Kia vehicle. Before resetting the light, adjust the tyre pressures according t…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos