Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Warning Light on a Kia Niro

Model: Kia Niro MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

Let's see how to reset the TPMS light on a 2018 Kia Niro like the one in the video: first, check the reference label located on the driver's door and bring all tyres to the correct pressure. On this model, the system resets itself after a few minutes of driving, once the correct pressures are detected, so there are no reset buttons to press or complicated procedures to follow: just drive for 5 to 10 minutes at a speed above 15 mph to allow the system to recalibrate.

On some versions, there is a reset button that we can use, but it will still require recalibration of the pressure through driving.


Posted on 5 August 2026 by ScegliAuto


Related tutorials

Kia Niro (2021-2026 / SG2) Today, we will discover the instructions to reset the tyre pressure warning on the Kia e-Niro. First, get into the vehicle and turn on the instrument…
Kia Niro (2016-2023 / MK 1) .. Today’s process will show you how to reset the tyre pressure warning light on a Kia Niro in simple steps; before performing the reset, e.. …
Kia Niro (2016-2023 / MK 1) After performing the regular service on your Kia Niro, the service warning light may remain on by mistake. In this case, follow the procedure below t…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos