Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Centre Dome Light on Kia Picanto

Model: Kia Picanto MK 1, 2A - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Interior dome light bulb

See other generations:
Video tutorial

How to remove the dome light in the Kia Picanto? Let's see how to detach it from the upper panel. Pry between the dome light and the lens above (be careful not to break anything), pull the lens out of the dome light and disconnect all the bulbs.

Unscrew the securing screws of the dome light and remove it. Fit the new dome light in its housing (push the transparent plastic with your hands until the side plastics are fully locked), install the bulbs, screw in the screws, and secure the lens. Test the correct operation of the dome light after installation.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Position Light Bulb of a Kia Picanto?
How to Remove the Front Position Light Bulb of a Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) Good morning, today's objective is to remove the front position light bulb of your Kia Picanto. Start by lifting the front of the car with a jack. Th…
How to Replace the Antenna on a Kia Picanto?
How to Replace the Antenna on a Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) To replace the antenna on a Kia Picanto, use a tool to pry at the rear of the headlining to detach it and access the screws hidden beneath. These scr…
Replacing the Gear Gaiter on a Kia Picanto
Replacing the Gear Gaiter on a Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) Want to remove the gear gaiter on a Kia Picanto? Let’s go through the disassembly of the parts above the centre tunnel. Unscrew the gear knob from th…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos