Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Kia
  4. :
  5. Picanto
  6. : Interior dome light bulb

Kia Picanto - Interior dome light bulb

Interior Dome Light Bulb Kia Picanto (2004-2011 / 2a, mk 1)

Kia Picanto (2004-2011 / 2A, MK 1)
How to replace the interior light of the Kia Picanto

Today we will show you how to replace the interior light bulb of the dashboard on a Kia Picanto vehicle. To perform the replacement of the light, it is …Read all…
Posted on 25 August 2025 by ScegliAuto
Kia Picanto (2004-2011 / 2A, MK 1)
Removing the Centre Dome Light on Kia Picanto

How to remove the dome light in the Kia Picanto? Let's see how to detach it from the upper panel. Pry between the dome light and the lens above (be careful not …Read all…
Posted on 12 April 2026 by ScegliAuto

Airbag (1) Speaker (1) Antenna (1) Car stereo (6) Battery (4) Spark plugs (4) Body (4) Key (14) Timing belt (5) Air conditioner (1) Onboard computer (3) Checks and maintenance (12) Throttle body (1) Dashboard (4) Shifter boot (1) Brake rotors (1) Headlight (4) Tail light (3) Fog lights (3) Air filter (5) Cabin air filter (3) Oil filter (2) Parking brake (4) Clutch (15) Light bulb (6) Headlight bulb (19) Tail light bulb (2) Interior dome light bulb (2) (1) Transmission fluid (1) Engine oil (6) Clock (9) Door trim panel (5) Front bumper (2) Rear bumper (2) Brake pads (1) Fuel pump (4) Push button (1) Instrument cluster (3) Radiator (2) Fuse box (20) Door lock (1) Suspension system (1) Side mirror (4) Warning light – error code (2) Tire pressure warning light (21) Service warning light (23) Fuel cap (1) Windshield wipers (1) Thermostat (2)

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos