Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : Radiator

Kia Picanto - Radiator

Radiator Kia Picanto (2004-2011 / 2a, mk 1)

Kia Picanto (2004-2011 / 2A, MK 1)
Guide to Replacing the Radiator on the Kia Picanto
Today's guide will show you the main instructions for removing and replacing the radiator on the Kia Picanto. First, open the bonnet of the vehicle and begin …Read all…
Posted on 23 July 2026 by ScegliAuto
Kia Picanto (2004-2011 / 2A, MK 1)
How to Replace the Radiator on the Kia Picanto?
To replace the radiator on the Kia Picanto, open the bonnet to access the engine bay and remove the 10mm bolts located at the front, at the top of the bumper. …Read all…
Posted on 13 June 2026 by ScegliAuto
Airbag (1) Speaker (1) Antenna (1) Car stereo (6) Battery (4) Spark plugs (4) Body (4) Key (14) Timing belt (5) Air conditioner (1) Onboard computer (3) Checks and maintenance (12) Throttle body (1) Dashboard (4) Shifter boot (1) Brake rotors (1) Headlight (4) Tail light (3) Fog lights (3) Air filter (5) Cabin air filter (3) Oil filter (2) Parking brake (4) Clutch (14) Light bulb (5) Headlight bulb (19) Tail light bulb (2) Interior dome light bulb (2) (1) Transmission fluid (1) Engine oil (6) Clock (9) Door trim panel (5) Front bumper (2) Rear bumper (2) Brake pads (1) Fuel pump (4) Push button (1) Instrument cluster (3) Radiator (2) Fuse box (20) Door lock (1) Suspension system (1) Side mirror (4) Warning light – error code (2) (10) Tire pressure warning light (11) Service warning light (22) Fuel cap (1) Windshield wipers (1) Thermostat (2)

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos