|
Do it yourself
| |||
| ||||
How to Install LEDs in the Number Plate Lights of the Kia Soul
Model: Kia Soul
MK 1
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014
Video tutorial
To install LEDs in the number plate lights of the Kia Soul, first remove the small light unit from its housing that contains the bulbs illuminating the number plate. Its position is directly above the number plate holder of the vehicle, on the small horizontal upper profile of the bodywork. To perform this operation, use a flathead screwdriver to unclip the small light unit from its housing by acting on the two side clips, and then remove it. At this point, simply connect the new light unit, equipped with LEDs, to the electrical connections, refit it into its place, and secure it using the two side clips. Repeat the same operation for the adjacent light that serves the same function.
Updated on 19 March 2026 by ScegliAuto
Related tutorials
Kia Soul
(2008-2014 /
MK 1)
Remove the front fog light bulbs if they are blown. Here’s how to replace the fog light bulbs in a Kia Soul. Access the light located in the front bu…
Kia Soul
(2008-2014 /
MK 1)
First, remove the number plate to gain the necessary space to replace the bulbs that illuminate it. At this point, you will need almost no tools, jus…
Kia Soul
(2013-2018 /
MK 2)
Before you start, open the bonnet of your Kia Soul. Begin by unscrewing and removing the bolts that secure the front headlamp to the vehicle. Next, d…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |