|
Do it yourself
| |||
| ||||
Kia Carnival: How to Fit Side Steps DIY
Model: Kia Carnival
MK 4, KA4
- Years:
2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
On the Kia Carnival, prepare the kit components (side steps, support brackets, and bolts) and work on a flat surface. From the front wheel arch, remove the clips from the trim and free the lower edge of the side skirt; repeat the operation at the rear and detach the end of the side skirt, as shown in the video. Under the body, locate the pre-drilled holes and insert the bracket screws with washers into the slots, hand-tightening them to allow for position adjustment. Present the brackets on the screws, use the slots for alignment, and ensure all slots are occupied. Position the side step, engage it in the upper guide clips, check the distance from the door edge, and adjust the brackets until the side step is parallel to the side. When alignment is correct, securely tighten the bracket nuts and reattach the wheel arch trims. Repeat on the opposite side and check the stability of the side step and the proper closure of the Kia Carnival doors.
Posted on 12 May 2026 by ScegliAuto
Related tutorials
Kia Carnival
(2006-2014 /
MK 2, VQ)
In this video tutorial, you can see how to reset the engine oil light on a Kia Carnival. The first step is to perform maintenance on the vehicle, suc…
Kia Carnival
(2006-2014 /
MK 2, VQ)
To replace the cabin filter on a Kia Carnival, open the glove compartment on the passenger side to access the screws that secure it from the inside. …
Kia Carnival
(2021-2026 /
MK 4, KA4)
To safely replace the engine air filter of your new Kia Carnival (2026 model year), follow the simple procedure outlined in this mini guide. First, p…
Other guides you may be interested in
|
How to open the bonnet on a Volkswagen Golf?
In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |