Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Shock Absorber on Kia Quoris

Model: Kia Quoris K9 K900 MK 2, RJ - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Shocks

See other generations:
Video tutorial

To replace the shock absorber on the Kia Quoris, lift the car with a jack or lift so that the corresponding wheel is not in contact with the ground. Then, remove the wheel by unscrewing the bolts that secure it to the hub and access the rear components: here, the shock absorber will be secured at the top and bottom with specific bolts.

Unscrew them to remove the shock absorber and insert the new one, securing it again with the appropriate bolts. Finally, mount the wheel and lower the car, checking that the shock absorber functions properly.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in a Kia Quoris K9 K900?
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) To replace the cabin filter in a Kia Quoris K9 K900, open the glove compartment on the passenger side by releasing the pins inside. After removing th…
Kia Quoris K9 K900 Issue
Kia Quoris K9 K900 Issue
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) Today, let's look at a known issue regarding the Kia Quoris K900. This is a problem with the alternator that can occur during the vehicle's use. If y…
How to Replace the Windshield Wiper Blades on a Kia Quoris?
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) To replace the windshield wiper blades on a Kia Quoris, lift the wipers to a vertical position. Once lifted, leverage at the joint between the arm an…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos