Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Blades on a Kia Quoris?

Model: Kia Quoris K9 K900 MK  1, KH - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

See other generations:
This video is currently unavailable

To replace the windshield wiper blades on a Kia Quoris, lift the wipers to a vertical position. Once lifted, leverage at the joint between the arm and the blade to pull it off by lifting it upwards.

After removing one blade, perform the same operation on the other side to remove both. At this point, position the blades back on the windshield to verify that they work correctly.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Kia Quoris K9 K900 Issue
Kia Quoris K9 K900 Issue
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) Today, let's look at a known issue regarding the Kia Quoris K900. This is a problem with the alternator that can occur during the vehicle's use. If y…
Kia Quoris K9 K900 Fuse Diagram
Kia Quoris K9 K900 Fuse Diagram
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) In this vehicle model, all fuses are located within 3 boxes. The first is in the cabin on the left side near the driver's door and is protected by a …
How to Locate and Identify the Fuse Diagrams in a Kia Quoris K9 K900
How to Locate and Identify the Fuse Diagrams in a Kia Quoris K9 K900
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) The first fuse panel in a Kia Quoris K9 K900 can be identified inside the vehicle's cabin, located directly behind the dashboard on the lower left si…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos