Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Locate and Identify the Fuse Diagrams in a Kia Quoris K9 K900

Model: Kia Quoris K9 K900 MK  1, KH - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018

See other generations:
Video tutorial

The first fuse panel in a Kia Quoris K9 K900 can be identified inside the vehicle's cabin, located directly behind the dashboard on the lower left side of the steering wheel; this panel contains fuses assigned to: audio, navigation system, brake lights, automatic light sensors, rain sensor, BCM, start and stop, instrument cluster, display, airbags, sunroof, etc. In the engine compartment, you can locate two more fuse panels, one on the right and one on the left of the engine; these contain fuses assigned to: brake lights, stop lights, ESP, alternator, battery, ECM, windshield wiper motor, washer pump, fuel pump, injectors, solenoid, TCM, smart cruise control, oxygen sensor, etc. Finally, in the trunk, you can find the last panel behind the carpet, which contains: power windows, fuel pump, trunk release, seat heating, fog lights, door locks, AMP, etc.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

Kia Quoris K9 K900 Fuse Diagram
Kia Quoris K9 K900 Fuse Diagram
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) In this vehicle model, all fuses are located within 3 boxes. The first is in the cabin on the left side near the driver's door and is protected by a …
Kia Quoris K9 K900 Issue
Kia Quoris K9 K900 Issue
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) Today, let's look at a known issue regarding the Kia Quoris K900. This is a problem with the alternator that can occur during the vehicle's use. If y…
How to Replace the Windshield Wiper Blades on a Kia Quoris?
Kia Quoris K9 K900 (2012-2018 / MK  1, KH) To replace the windshield wiper blades on a Kia Quoris, lift the wipers to a vertical position. Once lifted, leverage at the joint between the arm an…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos