Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Fog Light Bulb on the Kia Picanto

Model: Kia Picanto MK 1, 2A - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fog lights

See other generations:
Video tutorial

The instructions in this guide will show you how to dismantle and replace the fog light bulb in the front headlight of the Kia Picanto. First, open the car's bonnet and begin to dismantle and remove the front bumper; then disconnect the electrical connector of the bulbs, unscrewing the internal screws to remove the fog light, as shown in the video.

At this point, replace the fog light bulb with a new one of the correct type and fitting; reassemble the fog light and the front bumper!


Posted on 30 April 2026 by ScegliAuto


Related tutorials

Location of the Power Steering Fluid Reservoir on a Kia Picanto
Location of the Power Steering Fluid Reservoir on a Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) In this video, we show where the reservoir for the power steering fluid is located on a Kia Picanto. Fortunately, it is easily accessible on the left…
How to Replace the Thermostat on a Kia Picanto?
How to Replace the Thermostat on a Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) To replace the thermostat on a Kia Picanto, open the bonnet to access the bolts securing the two front headlights. Remove these bolts completely alon…
Guide to replacing the clutch cable of the Kia Picanto
Guide to replacing the clutch cable of the Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) We will now discover the instructions that will allow us to disassemble and replace the clutch cable of the Kia Picanto. First, let's open the hood o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos