|
Do it yourself
| |||
| ||||
Alternative Method for Replacing the Headlights of the Kia Picanto
Model: Kia Picanto
2A, MK 1
- Years 2004-2011
The video shows an alternative solution for removing a very stuck headlight from a Kia Picanto MK1. The headlight does not come out using the traditional method (the finger method under the bumper; too much stiffness after years of use due to mechanical clips). The solution in the video is to use a sturdy rope (or strap) and pass this cable behind the headlight, in the space between the headlight and the bumper. Pull with leverage, outward and forward: this way, you will have more distributed force without damaging your fingers. The method works because it distributes the force across the entire width of the headlight, avoids breaking the plastic tabs, and prevents finger injuries when the headlight is very stuck. Use a soft cable to avoid scratching, check for any obstacles behind the headlight (like wires or connectors); pull gradually, avoiding jerking, and first disconnect the battery and unplug the electrical connector.
Posted on 1 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Kia Picanto
(2011-2018 /
TA, MK 2)
Replacing the thermostat on a Kia Picanto requires some specific steps. Here is a general guide that may help you. Open the hood of your Kia Picanto …
Kia Picanto
(2004-2011 /
2A, MK 1)
On the Kia Picanto, the fuses are contained in dedicated fuse boxes. On this car model, you will find two boxes that manage the fuses. The first is l…
Kia Picanto
(2011-2018 /
TA, MK 2)
Let's discover the method to reset the Service light in the 2013 Kia Picanto. It is understood that the cancellation of the service reminder should o…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.118
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |