Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : Replacing the headlight bulbs on Kia Picanto

Kia Picanto - Video tutorial

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Headlight bulb
Operation: Replacing the headlight bulbs on Kia Picanto

Kia Picanto bulbs damaged? Let's see how they change from the inside of the headlights. We open the front hood by pulling the lever located at the bottom right of the dashboard, let's put it in safety. We find the inspection cap of the lighthouse (located in the rear part of the lighthouse) and remove it with your hand. We take out the lamp holders from the headlight and we go to extract the damaged bulb. We mount the new bulb and (always suitable type and size) we insert the lamp holder in the lighthouse housing. Before closing the front hood of the car we need to fit the plastic inspection caps of the headlight.


Posted on 3 December 2023 by ScegliAuto



How to replace the front headlight and its bulbs of the Kia Picanto.
Kia Picanto (2004-2011 / MK 1, 2A) Today's guide will show us the process of disassembling and replacing the front headlight and its bulbs of the Kia Picanto. First, we open the engine
How to replace the lights of the Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) How to replace the headlights of the Picanto? Let's see how to remove the headlight bulbs. We lift the front hood, remove the inspection cap at the r
How to replace the headlight bulb on the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Begin to carry out the preliminary operations for the replacement, in fact it will be necessary to unhook the hood from the special lever to be able

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos