Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Kia Picanto

Model: Kia Picanto TA, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

To turn on the front lights of the Kia Picanto, it is necessary to rotate the front wheels of the vehicle outwards. To access the front headlight, we must remove the fender cover.

Remove the plastic clips that hold the fender in place with a flat-head screwdriver and then unscrew the small screws. Remove the light bulb and disconnect the connector.

Connect the new light bulb to the connector and follow the same procedure for the left bulb. After replacing both bulbs, turn on the vehicle to check that everything is working properly, if not, check the fuses.


Posted on 16 September 2025 by ScegliAuto


Related tutorials

How to replace the front headlight bulb of the Kia Picanto
How to replace the front headlight bulb of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replace the bulb of the right front headlight of the Kia Picanto. Model produced from 2011 to 2017, it is a really simple and quick operation to be c…
How to Replace the Front Headlamp Bulb in a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replacing the left front headlamp bulb in a Kia Picanto is a very simple and quick task to perform independently. Start the procedure by turning the …
How to replace the headlight bulb on a Kia Picanto?
How to replace the headlight bulb on a Kia Picanto?
Kia Picanto (2004-2011 / MK 1, 2A) To replace the headlight bulb on a Kia Picanto, open the bonnet to access the engine bay and remove the circular plastic cover located at the back of…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos