Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the clutch cable of the Kia Picanto

Model: Kia Picanto 2A, MK 1 - Years 2004-2011

We will now discover the instructions that will allow us to disassemble and replace the clutch cable of the Kia Picanto. First, let's open the hood of the vehicle and start disassembling and removing the intake hose and the air filter box by unscrewing the fastening screws; then we go underneath to disconnect the clutch cable from the top of the transmission, removing it along with its sheath (disconnecting it later from the pedal). At this point, we install the new clutch pedal, securing it properly, and finally make the necessary adjustments.

Posted on 17 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Adjusting the Clutch on the Kia Picanto
Guide to Adjusting the Clutch on the Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) Today's guide will illustrate the main steps useful for adjusting the clutch on the Kia Picanto, following the instructions below. First, ensure that…
How to replace the clutch cable of the Kia Picanto
How to replace the clutch cable of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) In this guide we will see the main instructions that will allow us to disassemble and replace the clutch cable of the Kia Picanto. First, we open the…
How to replace the clutch cable of the Kia Picanto
How to replace the clutch cable of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Today we will discover the instructions that will allow us to disassemble and replace the clutch cable of the Kia Picanto in simple steps. First, we …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos