Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front bumper of the 2017 Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Front bumper

Removing the front bumper of the Kia Picanto can be a crucial operation to perform in order to replace the front headlights or proceed with the replacement of the bumper itself. To remove the bumper, we first need to open the front hood and using a 10 mm key, unscrew all the upper screws. Move to the side of the bumper and remove the clips on the wheel arch and using an 8 mm key, unscrew the screws. Perform the same operation on the left side. Using the 10 mm key, unscrew the lower screws of the bumper and remove it from its seat.

Posted on 17 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front bumper of the Kia Picanto.
How to remove the front bumper of the Kia Picanto.
Kia Picanto (2018-2026 / MK 3, JA) Let's see how to remove the front bumper of the Kia Picanto; we will only need a Phillips screwdriver. Let's lift the hood and find the two screws hi…
Replacing the Front Fog Light Bulb on the Kia Picanto
Replacing the Front Fog Light Bulb on the Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) The instructions in this guide will show you how to dismantle and replace the fog light bulb in the front headlight of the Kia Picanto. First, open t…
How to remove the rear bumper of the Kia Picanto
How to remove the rear bumper of the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Today we will discover the process of disassembly and replacement of the rear bumper of the Kia Picanto, in simple and quick steps. First of all, let…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos