Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bumper on the Kia Telluride

Model: Kia Telluride MK 1 - Years 2019-2026
Part: Front bumper

Discover the steps to remove and replace the front bumper on the Kia Telluride. First, open the hood of the vehicle and start unscrewing all the mounting screws located at the top and bottom of the front bumper; unscrew the additional screws located on both sides of the front wheel wells, as shown in the video. At this point, pry on the sides to detach and remove the front bumper, disconnecting the headlight connectors; perform the repair or replacement of the bumper, installing it correctly.

Posted on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on the Kia Telluride?
How to Remove the Front Bumper on the Kia Telluride?
Kia Telluride (2019-2026 / MK 1) To remove the front bumper, start by unscrewing the 10mm bolts located in the fender. Begin at one of the corners closest to the wheels and continue …
How to Replace the Windshield Wiper Blades on a Kia Telluride
How to Replace the Windshield Wiper Blades on a Kia Telluride
Kia Telluride (2019-2026 / MK 1) To replace the windshield wiper blades on a Kia Telluride, lift the wiper arms and the corresponding blades so that they are not in contact with the …
How to Replace the Front Wipers of the Kia Telluride
How to Replace the Front Wipers of the Kia Telluride
Kia Telluride (2019-2026 / MK 1) Let's discover how to remove and replace the front wipers of the Kia Telluride by following the instructions below. First, move to the front of the v…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos