Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on the Kia Telluride?

Model: Kia Telluride MK 1 - Years 2019-2026
Part: Front bumper

To remove the front bumper, start by unscrewing the 10mm bolts located in the fender. Begin at one of the corners closest to the wheels and continue all around. Next, remove the 8mm bolt located at the top corner of the bumper and do the same on the other side. Now that the bolts are out, disconnect the clips: proceed as shown in the video, using your hands just like the YouTuber to disengage the various clips in the indicated order. Start with the side clips and then continue all around until the bumper is completely removed.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bumper on the Kia Telluride
How to Replace the Front Bumper on the Kia Telluride
Kia Telluride (2019-2026 / MK 1) Discover the steps to remove and replace the front bumper on the Kia Telluride. First, open the hood of the vehicle and start unscrewing all the moun…
Replace the Front Kia Logo with the Updated 2022 Version on a Kia Telluride
Replace the Front Kia Logo with the Updated 2022 Version on a Kia Telluride
Kia Telluride (2019-2026 / MK 1) On this Kia Telluride, there was the new Kia logo on the back while the old oval logo was still on the front. Our YouTuber decided to change it - rig…
How to Replace the Front Wipers of the Kia Telluride
How to Replace the Front Wipers of the Kia Telluride
Kia Telluride (2019-2026 / MK 1) Let's discover how to remove and replace the front wipers of the Kia Telluride by following the instructions below. First, move to the front of the v…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos