Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Blades on a Kia Telluride

Model: Kia Telluride MK 1 - Years 2019-2026
Part: Windshield wipers

To replace the windshield wiper blades on a Kia Telluride, lift the wiper arms and the corresponding blades so that they are not in contact with the windshield. Once the old blades are lifted, remove the clip that connects them to the arm by pulling them down. At this point, you can insert the new blades onto the arms, securing them with the appropriate clips. Then, position the blades on the windshield to verify that they function correctly.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wipers of the Kia Telluride
How to Replace the Front Wipers of the Kia Telluride
Kia Telluride (2019-2026 / MK 1) Let's discover how to remove and replace the front wipers of the Kia Telluride by following the instructions below. First, move to the front of the v…
How to Locate the Fuse Boxes and Understand Their Diagrams in a Kia Telluride
How to Locate the Fuse Boxes and Understand Their Diagrams in a Kia Telluride
Kia Telluride (2019-2026 / MK 1) In this video, you can learn the location of the fuse box in a Kia Telluride and its corresponding assignment diagrams. The first fuse box is located…
How to Reset the Service Light in the 2021 Kia Telluride?
How to Reset the Service Light in the 2021 Kia Telluride?
Kia Telluride (2019-2026 / MK 1) Resetting the service light in the Kia Telluride is done through a procedure that starts by turning on the instrument cluster and pressing the button…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos