Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Rear bumper

Today we will discover the process of disassembly and replacement of the rear bumper of the Kia Picanto, in simple and quick steps. First of all, let's move to the back and start by opening the trunk door; then we remove the clips located on the top of the rear bumper and unscrew the screws located on both sides of the rear wheel arches, as shown in the video. At this point, we gently detach the bumper from the sides until it is completely removed, replacing it with the new one; we reassemble and properly secure the rear bumper on all points!

Posted on 15 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper from a Kia Picanto?
How to Remove the Rear Bumper from a Kia Picanto?
Kia Picanto (2004-2011 / 2A, MK 1) To remove the rear bumper from the Kia Picanto, open the tailgate to access the bolts securing the rear lights. Once the lights are removed by discon…
How to remove the front bumper of the Kia Picanto.
How to remove the front bumper of the Kia Picanto.
Kia Picanto (2018-2026 / MK 3, JA) Let's see how to remove the front bumper of the Kia Picanto; we will only need a Phillips screwdriver. Let's lift the hood and find the two screws hi…
How to remove the front bumper of the 2017 Kia Picanto
How to remove the front bumper of the 2017 Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Removing the front bumper of the Kia Picanto can be a crucial operation to perform in order to replace the front headlights or proceed with the repla…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos