Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : How do you replace the thermostat on the Kia Picanto?

Kia Picanto - Video tutorial

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Thermostat
Operation: How do you replace the thermostat on the Kia Picanto?

In order to replace the thermostat of the Kia Picanto you have to go to open the hood, so that you can loosen the bolts that fix the two headlights, removing them completely together with the front grille of the car: in this way it will be possible to have access to the front part of the engine, where there will be the coolant passage pipe, which will have to be removed by loosening the fixing ring. At this point the thermostat will be visible, which can be removed from its seat and replaced with a new spare part; after replacement it will be possible to assemble the removed parts.


Posted on 11 September 2022 by ScegliAuto



How to replace the thermostat on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Replacing the thermostat on a Kia Picanto requires some specific steps. Here is a general guide that may help you. Open the hood of your Kia Picanto
Where is the OBD2 port located in the Kia Picanto 2?
Kia Picanto (2011-2018 / TA, MK 2) If you are curious to know where the OBD2 port is located on your second-generation Kia Picanto (year 2011-2018), then you just need to pay attention
How to reset the TPMS light of the 2015 Kia Picanto.
Kia Picanto (2011-2018 / TA, MK 2) If the orange tire pressure monitoring system (TPMS) light on the instrument panel of your second-generation Kia Picanto (2015 model year) illuminate

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos