Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the 2015 Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Tire pressure warning light

If the orange tyre light (TPMS) illuminates on the instrument cluster of your second-generation Kia Picanto (2015), it means there is a puncture or a loss of pressure. To resolve this issue, you need to inflate the tyres to the correct pressure or replace them in case of a puncture. Once this operation is complete, start your Kia Picanto and drive a few miles to force the system to perform a new pressure reading. Finally, turn off the instrument cluster as soon as the TPMS light disappears from the dashboard.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2018 Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) The Service light illuminates on the dashboard of the Kia Picanto when it is necessary to perform the service operations. After completing all the ch…
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) This guide will show you how to reset the tyre pressure warning light on the Kia Picanto in simple and quick steps. First, check the pressure of your…
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
How to Reset the Tyre Pressure Warning Light on the Kia Picanto
Kia Picanto (2018-2026 / MK 3, JA) Here are the steps to reset the tyre pressure warning light on the Kia Picanto; before resetting the TPMS sensors, ensure all four tyres are at the c…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos