Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the water pump on the Kia ProCeed

Model: Kia Proceed CD - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Pump

Video tutorial

Let's see how to replace the water pump on the Kia ProCeed; the mechanic in the video is performing a complete maintenance of the cooling system, replacing three critical components together; water pump, thermostat, and timing belt tensioner pulley.

It is necessary to remove several components to access the water pump, including the timing belt, the battery, and other elements in the engine area; among these, the tensioner pulley (the tensioner) which is made of metal, while the previous one was made of plastic, with a noticeable improvement in durability.

When reassembling the water pump, it is essential to follow a precise tightening sequence of the bolts: the video mentions the sequence 1,2, 3,4, 5. All bolts must be tightened with a torque wrench to 10 Nm. It is a somewhat complex job, which requires a good mechanical knowledge and a lot of precision, although in general it is feasible and does not present major obstacles.


Posted on 2 November 2025 by ScegliAuto


Related tutorials

How to Reset Service on KIA ProCeed?
How to Reset Service on KIA ProCeed?
Kia Proceed (2018-2024 / CD) In this tutorial, you will see how to reset the service on the KIA ProCeed, a very simple and quick operation to perform only after completing all sc…
How to reset the service light on a 2019 Kia Proceed.
How to reset the service light on a 2019 Kia Proceed.
Kia Proceed (2018-2024 / CD) In the following guide, you will find the description of all the various steps you need to take if you intend to complete the manual reset of the ser…
How to reset the service in the KIA ProCeed?
How to reset the service in the KIA ProCeed?
Kia Proceed (2018-2024 / CD) In this tutorial we can see how to reset the service in the KIA ProCeed, an extremely simple and quick operation, to be carried out only once all sch…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos