Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Battery in a Kia Forte

Model: Kia Forte K3 MK  2, YD - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

To replace the battery in a Kia Forte, open the hood, secure it in place, and locate the battery in the engine compartment. Disconnect the negative terminal first, then the positive terminal using an appropriate wrench.

Remove the bracket that secures the battery and lift it out carefully. Place the new battery in the same compartment and secure it with the bracket.

Connect the positive terminal first, then the negative, ensuring the clamps are tight. Turn on the ignition and check that the system operates correctly without any error messages.


Posted on 4 November 2026 by ScegliAuto


Related tutorials

Kia Forte K3 (2018-2025 / MK  3, BD) If you own a Kia Forte and want to find out the steps you need to take to replace the remote battery, then all you have to do is read the following g…
Kia Forte K3 (2018-2025 / MK  3, BD) Replacing the key fob battery in a KIA Forte, as shown in this tutorial, is an extremely simple and quick task. To do this, you will need a replaceme…
Kia Forte K3 (2013-2018 / MK  2, YD) In this tutorial, you will see how to replace the remote battery in a KIA Forte, a very simple and quick operation. For this, you will need a small f…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos