Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on Kia Picanto

Model: Kia Picanto 2A, MK 1 - Years 2004-2011
Part: Fuel pump

These brief and simple steps will guide you on how to remove and replace the fuel pump on the Kia Picanto. First, open the rear doors of the vehicle and begin by removing the rear seat by pulling it upwards; this will allow access to the fuel pump, disconnecting the electrical connector and the fuel line. Next, unscrew the plastic ring of the pump, removing it from the petrol tank; replace it with the new original one, reconnecting it and verifying the correct starting of the engine!

Posted on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Kia Picanto
How to Replace the Fuel Pump on a Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) To replace the fuel pump on a Kia Picanto, you need to loosen the screws securing the rear seat so that it can be completely removed. Once the seat i…
Where are the fuses located in the Kia Picanto?
Where are the fuses located in the Kia Picanto?
Kia Picanto (2018-2026 / MK 3, JA) Every fuse of the Kia Picanto is located inside one of the fuse boxes that are installed on the vehicle: in this type of vehicle it is possible to id…
How to open the fuel door in the KIA Picanto?
How to open the fuel door in the KIA Picanto?
Kia Picanto (2011-2018 / TA, MK 2) In this tutorial we can see how to open the fuel door in the KIA Picanto, a very simple operation that is not different from the typical procedure of…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos