Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Problem of lack of power on the Kia Picanto

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Fuel pump

In this video we can see a rather common problem with the Kia Picanto, namely the loss of power due to a faulty fuel pump. The YouTuber shows us that no errors were detected by the diagnosis scanner, but if we connect a pressure gauge to the fuel pump pressure, with the engine running hot. The minimum pressure that the pump must maintain is about 3 bar, so that the vehicle does not lose power, while instead we see that it always remains below this value. The solution is therefore to replace the pump, or to remove it and overhaul it.

Posted on 30 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Kia Picanto with LPG that requires switching to gasoline.
Kia Picanto with LPG that requires switching to gasoline.
Kia Picanto (2018-2026 / MK 3, JA) In this video, we examine the anomaly of a Kia Picanto where the audible and visual warning continued to request a switch from LPG to petrol, even th…
How to reset the TPMS light on the 2015 Kia Picanto
How to reset the TPMS light on the 2015 Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) If the orange tyre light (TPMS) illuminates on the instrument cluster of your second-generation Kia Picanto (2015), it means there is a puncture or a…
Resetting the Tyre Pressure Warning Light on a Kia Picanto 2019
Resetting the Tyre Pressure Warning Light on a Kia Picanto 2019
Kia Picanto (2018-2026 / MK 3, JA) In this video tutorial, you will learn how to reset the tyre pressure warning light on a third series Kia Picanto in simple steps; before performing …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos