Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the fuel pump on a Kia Picanto?

Model: Kia Picanto MK 3, JA - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuel pump

See other generations:
Video tutorial

Start this operation by disconnecting the negative terminal of the battery: the pump is located under the rear seat (but depending on the production year, it could also be under the cover in the boot). Clean the area around the cover thoroughly to prevent dirt from falling into the tank; disconnect the electrical connector and then disconnect the fuel line.

The pump cover is secured with a locking ring (3 clips to push simultaneously). Be careful: there is a spring underneath that pushes the pump upwards.

Disconnect the internal electrical connectors (one for the pump and one for the float) and remove the pump. In the video, the issue is a crack in the plastic tube of the cover, not the pump.

The cover was sourced from the second-hand market, and once replaced, you can reinstall the pump assembly in the tank, ensuring the float is oriented correctly (arrow pointing up). Refit the locking ring, reconnect the hoses and the connector, and attempt to start the engine.

The first time, just turn the key without starting the engine to fill the fuel lines.


Posted on 24 May 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on Kia Picanto
How to Replace the Fuel Pump on Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) These brief and simple steps will guide you on how to remove and replace the fuel pump on the Kia Picanto. First, open the rear doors of the vehicle …
How to Replace the Fuel Pump on a Kia Picanto
How to Replace the Fuel Pump on a Kia Picanto
Kia Picanto (2004-2011 / MK 1, 2A) To replace the fuel pump on a Kia Picanto, you need to loosen the screws securing the rear seat so that it can be completely removed. Once the seat i…
Problem of lack of power on the Kia Picanto
Problem of lack of power on the Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) In this video we can see a rather common problem with the Kia Picanto, namely the loss of power due to a faulty fuel pump. The YouTuber shows us that…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos