Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Fog Light Bulb on a Kia Rio

Model: Kia Rio YB, MK 4, SC - Years 2016-2023
Part: Fog lights

Today, we will discover the steps to remove and replace the front fog light bulb on a Kia Rio, located on the bumper. To access the fog light bulb, it will be necessary to remove the front wheel arch liner by taking out the plastic clips; remove the fog light protection cover and disconnect its electrical connector, then remove and replace the bulb with a new one (of the correct type and with the same fitting), as shown in the video. At this point, reconnect the bulb and reassemble the front wheel arch liner, checking its operation!

Posted on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Headlamp Bulbs on Kia Rio
How to Change Headlamp Bulbs on Kia Rio
Kia Rio (2017-2023 / ) Are the bulbs in the headlamp of your Kia Rio blown and need changing? Here's how to do it. Open the front bonnet by pulling the lever located at the…
How to replace the front headlights of the Kia Rio
How to replace the front headlights of the Kia Rio
Kia Rio (2011-2017 / UB, MK 3) Today we will replace the bulbs of the right front headlight of the Kia Rio. The steps for replacing the bulbs are very simple and quick to perform i…
How to Replace the Front Headlight Bulb on a Kia Rio
How to Replace the Front Headlight Bulb on a Kia Rio
Kia Rio (2011-2017 / UB, MK 3) To replace the front headlight bulb on a Kia Rio, open the bonnet to access the rear of the headlight corresponding to the bulb that needs replacing.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos