Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Rio
    4. : How do you replace the Kia Rio headlight bulb?

Kia Rio - Video tutorial

Model: Kia Rio MK 3, UB - Years 2011-2017
Part: Headlight bulb
Operation: How do you replace the Kia Rio headlight bulb?

To be able to replace the bulb in the headlight of the Kia Rio, you have to go and open the bonnet, so that you can access the rear part of the headlight corresponding to the bulb to be replaced. Here it will be possible to locate the circular protective cover, which will have to be detached in order to have access to the internal bulb. The latter must be detached from the connector and removed from inside its housing, so that the new one can be inserted, connecting it to the connector; finally, it will be necessary to close everything with the circular lid, checking that the device is working.


Posted on 11 May 2023 by ScegliAuto



How to change the headlight bulbs on Kia Rio
Kia Rio (2017-2023 / ) Are the bulbs mounted in the headlight of the Kia Rio burned out and need to be changed? Let's see how they change. We open the front hood by pulling
How to change the headlight bulb on Kia Rio
Kia Rio (2011-2017 / MK 3, UB) We want to change the bulb from inside the headlight of a Kia Rio? Let's see how to disassemble the damaged bulb. We lift the front hood, find the in
How do you replace the interior light bulb of a Kia Rio?
Kia Rio (2016-2023 / MK 4, SC, YB) To replace the interior lights bulb of the Kia Rio, you need to use a screwdriver to pry off the light cover that protects the bulb. Once the cover i

    Frequently Asked Questions

    • Rio 2011-2017 - How to replace the headlight bulb on a Kia Rio? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos