Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery on KIA Cadenza?

Model: Kia Cadenza K7 MK  2, YG - Years: 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

See other generations:
Video tutorial

This tutorial demonstrates how to replace the key fob battery on a KIA Cadenza, a very simple and quick operation. You will need a replacement CR2032 battery and a small flathead screwdriver.

First, extract the emergency metal key by pressing the designated top button. Then, use the screwdriver in the indicated slot to pry apart the two halves of the key fob. At this point, remove the old battery, using the screwdriver if necessary, and insert the new one, ensuring the correct polarity.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on a KIA Cadenza
How to Replace the Key Fob Battery on a KIA Cadenza
Kia Cadenza K7 (2016-2021 / MK  2, YG) As shown in this tutorial, replacing the battery in the KIA Cadenza key fob is a very simple and quick operation. You will need a replacement CR2032 …
How to Replace the Remote Battery in the KIA Cadenza?
How to Replace the Remote Battery in the KIA Cadenza?
Kia Cadenza K7 (2016-2021 / MK  2, YG) In this tutorial, you will see how to replace the remote battery in the KIA Cadenza. For this simple and quick operation, you won't need any special …
How to Replace the Battery on a Kia Cadenza?
How to Replace the Battery on a Kia Cadenza?
Kia Cadenza K7 (2010-2016 / MK  1, VG) To replace the battery on a Kia Cadenza, open the hood to access the components inside the engine compartment: on the right side, near the left headl…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos