Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery on the Kia Cadenza K7

Model: Kia Cadenza K7 MK  1, VG - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Key

See other generations:
Video tutorial

If you notice that you cannot open and unlock the doors with your vehicle's remote key, you will need to replace the key battery. Below are the steps and instructions necessary for the replacement.

First, gather a small screwdriver and proceed to unlock and extract the emergency key. Take the screwdriver and pry at the junction between the remote and the cover to remove it. Underneath, you will find the battery, which you can take out while being careful to note the polarity.

Then, reposition the cover on the remote and snap it back in place, and finally, reinsert the emergency key.


Updated on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Kia Cadenza?
How to Replace the Battery on a Kia Cadenza?
Kia Cadenza K7 (2010-2016 / MK  1, VG) To replace the battery on a Kia Cadenza, open the hood to access the components inside the engine compartment: on the right side, near the left headl…
How to Replace the Remote Battery in the KIA Cadenza?
How to Replace the Remote Battery in the KIA Cadenza?
Kia Cadenza K7 (2016-2021 / MK  2, YG) In this tutorial, you will see how to replace the remote battery in the KIA Cadenza. For this simple and quick operation, you won't need any special …
How to Replace the Key Fob Battery on KIA Cadenza?
How to Replace the Key Fob Battery on KIA Cadenza?
Kia Cadenza K7 (2016-2021 / MK  2, YG) This tutorial demonstrates how to replace the key fob battery on a KIA Cadenza, a very simple and quick operation. You will need a replacement CR2032…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos