Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Kia Carens

Model: Kia Carens MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

In this brief and simple guide, you will see how to reset the service light on the Kia Carens, following the instructions below. First, get inside the vehicle and turn on the instrument panel; then press and hold the button on the instrument panel for about ten seconds, as shown in the video.

At this point, turn off the ignition and restart the engine, waiting about ten seconds before turning everything off; wait another ten seconds before restarting the engine, thus completing the service light reset operation!


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Kia Carens
How to Reset the Service Light on a Kia Carens
Kia Carens (2013-2019 / MK 3) This brief guide provides instructions on how to reset the service light for the routine maintenance of the oil change on a Kia Carens. First, get in…
Where to Find the Fuse Box on a Kia Carens 3
Where to Find the Fuse Box on a Kia Carens 3
Kia Carens (2013-2019 / MK 3) If you own a third-generation Kia Carens and want to locate the fuse box situated within the engine bay, simply follow these steps. First, fully lift…
Where is the Oil Filter on a Kia Carens?
Where is the Oil Filter on a Kia Carens?
Kia Carens (2013-2019 / MK 3) When the red oil warning light comes on in a Kia Carens, it means that you need to replace the engine oil and the corresponding filter. The oil filte…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos