Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Kia Sportage?

Model: Kia Sportage QL, MK 4 - Years 2016-2022
Part: Tire pressure warning light

To reset the tyre pressure warning light on a Kia Sportage, simply inflate the tyres to the recommended pressure: for this model, the recommended inflation pressure for each tyre is 2.4 bar and is indicated on the sticker affixed to the driver’s door pillar. Once the tyre pressures have been restored to the recommended value, turn on the ignition to check that the new pressures are registered by the sensors: after a few seconds, you will notice that the warning light will turn off.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Kia Sportage?
How do you reset the tire pressure light on the Kia Sportage?
Kia Sportage (2010-2016 / SL, MK 3) To reset the tire pressure warning light on the Kia Sportage, you need to inflate the tires to the recommended pressure value: this value is indicate…
How do you reset the tire pressure light on the Kia Sportage?
How do you reset the tire pressure light on the Kia Sportage?
Kia Sportage (2016-2022 / QL, MK 4) On the instrument panel of the Kia Sportage, the tire pressure warning light that appears can be reset by inflating the tires to the recommended pres…
How do you reset the tire pressure warning light on the Kia Sportage?
How do you reset the tire pressure warning light on the Kia Sportage?
Kia Sportage (2016-2022 / QL, MK 4) To make the tire pressure warning light disappear from the instrument panel of the Kia Sportage, you need to inflate the tires until they reach the r…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos