Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : How to replace the gear cables of the Kia Picanto.

Kia Picanto - Video tutorial

Model: Kia Picanto MK 1, 2A - Years 2004-2011
Operation: How to replace the gear cables of the Kia Picanto.

Below we will see the main steps that will allow us to disassemble and replace the gear cables of the Kia Picanto. First, we get into the car and start removing the central tunnel, first removing the gear knob and then the boot; then we unscrew the fixing screws, as shown in the video. At this point, we remove the metal clamp of the gear lever, disconnecting the gear cables and their sheaths; we disconnect the cables from the transmission to remove them and replace them with the new ones, following the video tutorial until the end!


Posted on 12 August 2023 by ScegliAuto



How do you replace the battery of the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) In order to replace the battery of the Kia Picanto, you need to open the hood so that you can have access to the components located inside the engine
How do you replace the battery in the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) To be able to replace the battery in the Kia Picanto, you need to open the bonnet and access the central part of the engine compartment, where the ba
Kia Picanto headset replacement
Kia Picanto (2004-2011 / MK 1, 2A) Do we want to remove the gearshift gaiter on Kia Picanto? We see the disassembly of the pieces from above the central tunnel. We unscrew the gear kno

    Frequently Asked Questions

    • Picanto 2018-2025 - How much does the service cost of a Kia Picanto actually cost? Read Answer
    • Picanto 2018-2025 - After how many kilometers should the first service be done on the Kia Picanto? Read Answer
    • Picanto 2004-2011 - How much does a new LPG donut cost for a gas-powered Kia Picanto? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos