Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Picanto
    4. : How do you replace the battery in the Kia Picanto?

Kia Picanto - Video tutorial

Model: Kia Picanto TA, MK 2 - Years 2011-2018
Part: Battery
Operation: How do you replace the battery in the Kia Picanto?

To be able to replace the battery in the Kia Picanto, you need to open the bonnet and access the central part of the engine compartment, where the battery itself is located. The latter must be removed from its housing after having loosened the fixing bolts and after having disconnected the cables connected to its terminals. Once the battery has been released, it will be possible to remove it from its housing and replace it with a new spare part. After the new battery has been inserted, it will need to be properly connected to its cables and fixed to its housing with the bolts.


Posted on 6 December 2022 by ScegliAuto



How do you replace the battery of the Kia Picanto?
Kia Picanto (2011-2018 / TA, MK 2) In order to replace the battery of the Kia Picanto, you need to open the hood so that you can have access to the components located inside the engine
How to replace the battery of the key for the 2018 Kia Picanto.
Kia Picanto (2011-2018 / TA, MK 2) Replacing the battery inside the key of your second generation Kia Picanto (2018) only takes a few seconds and with the following guide, you will be
How do you replace the battery of the Kia Picanto remote control?
Kia Picanto (2011-2018 / TA, MK 2) In order to replace the battery of the Kia Picanto remote control, you need to pry open the two halves of the remote control shell with an object. On

    Frequently Asked Questions

    • Picanto 2004-2011 - How long does the battery last on the Kia Picanto? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos