Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Niro
    4. : How do you reset the tire pressure warning light on the Kia Niro?

Kia Niro - Video tutorial

Model: Kia Niro MK 1 - Years 2016-2023
Part: Checks and maintenance
Operation: How do you reset the tire pressure warning light on the Kia Niro?

In order to reset the Service light on the Kia Niro, you need to inflate all the tires to the recommended pressure value. This value is indicated on the driver's side door pillar, on the sticker attached in that position. Once all the tires have been inflated, you will need to turn on the instrument panel so that the sensors are activated and can read the new pressure values. If the light does not turn off immediately, it may be necessary to drive for a few kilometers to facilitate the reading of the new values.


Posted on 6 October 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos