Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel of the Kia Niro

Model: Kia Niro MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Door trim panel

See other generations:
Video tutorial

Today's instructions will allow you to remove and replace the front door panel of the Kia Niro. First, open the front door and start removing the covers and plastic caps from the door panel; then unscrew all the fixing screws found underneath, prying at the sides to detach the door panel until it is removed, as shown in the video.

At this point, disconnect the opening handle cable and the electric connector of the window switch; apply the reverse procedure for reassembling the door panel!


Updated on 12 September 2026 by ScegliAuto


Related tutorials

Kia Niro (2016-2023 / MK 1) The 12V auxiliary battery of the Kia Niro is located on the right side of the boot: you can find it by opening the tailgate and removing the trim in …
Kia Niro (2016-2023 / MK 1) In this video, you can see where the fuse boxes are located for the KIA Niro and the corresponding diagrams to consult if you need to check the fuses…
Kia Niro (2021-2026 / SG2) To clear the Service light displayed on the instrument panel of the Kia Niro, turn on the display by inserting the ignition key into the lock. This w…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos