Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the KTM Duke 390?

Model: Ktm Duke 390
Part: Service warning light

Video tutorial

The Service light that appears on the instrument panel of the KTM Duke 390 can be reset by inserting the key to turn on the instrument panel, so that it is possible to navigate through the menu that will appear on the display using the controls on the left handlebar.

When the "Service" option appears, you will need to simultaneously press the up arrow and down arrow buttons for a few seconds.

This way, the Service light will disappear from the instrument panel and the maintenance interval will be reset; to verify that this has been done correctly, you will need to turn off and turn on the panel again.


Posted on 13 September 2025 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a KTM Duke 390
How to Reset the "Service" Light on a KTM Duke 390
Duke 390 Before starting, the regular service should already have been performed, and then you need to sit on the rider's seat of your KTM Duke 390. Start by …
How to Reset the Service Light on a KTM Duke 390?
How to Reset the Service Light on a KTM Duke 390?
Duke 390 You can completely clear the Service light on a KTM Duke 390 by inserting the key to turn on the instrument panel, allowing you to navigate the menu …
Resetting the Service Light on the KTM Duke 390
Resetting the Service Light on the KTM Duke 390
Duke 390 Today's step-by-step instructions will show you how to reset the service light for the routine maintenance oil change on the KTM Duke 390. First, pla…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos