Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to reset the service on the KTM Duke 250, a very simple and quick operation, to be performed only after completing all scheduled maintenance tasks. First, insert the key, then turn on the ignition, scroll through the various information on the display using the "MODE" button until you reach the service mileage. Then press and hold the "SET" button for the necessary time until the interval resets correctly, restart the ignition and check that the procedure has been successful.

Posted on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on the KTM Duke 250?
How to reset the service on the KTM Duke 250?
Duke 250 In this tutorial, we will see how to reset the service indicator on the KTM Duke 250. This operation is extremely simple and quick and should be done…
How do you replace the shock absorber of the KTM Duke 250?
How do you replace the shock absorber of the KTM Duke 250?
Duke 250 To replace the shock absorber of the KTM Duke 250, you need to loosen the screws that fix the component to its housing: this will be located between …
How to Replace the Rear Brake Pads on a KTM Duke 250?
How to Replace the Rear Brake Pads on a KTM Duke 250?
Duke 250 In this tutorial, you will see how to replace the rear brake pads on a KTM Duke 250, a very simple and quick operation. First, position yourself in f…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos