Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a KTM EXC 300

Model: Ktm Exc 300
Part: Clutch

Video tutorial

In this video tutorial, you will learn how to dismantle and replace the clutch on a KTM EXC 300, as well as on many other bikes in this category, following the instructions below. First, drain the engine oil by unscrewing the bolt underneath the engine, then unscrew the screws of the clutch cover found on the right side.

Next, unscrew the screws of the clutch pack and remove its discs, as illustrated in the video. At this point, replace the clutch discs with new ones and reassemble everything by applying the reverse procedure of disassembly!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Remove the Engine from a KTM EXC 300?
How to Remove the Engine from a KTM EXC 300?
Exc 300 To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the suppo…
How to Dismantle the Engine of the KTM EXC 300
How to Dismantle the Engine of the KTM EXC 300
Exc 300 To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the…
Guide to Removing the Thermostat from the KTM EXC 300
Guide to Removing the Thermostat from the KTM EXC 300
Exc 300 In this brief guide, you will find instructions to remove and replace the thermostat of the KTM EXC 300 enduro bike, as well as the 125 and 250 model…

How to Replace the Rear Brake Pads on the Kymco AK 550

You can replace the rear brake pads on the Kymco AK 550 by loosening the screws that secure the brake caliper in its housing: once these screws are loosened, you can detach the caliper from the disc so that the pads inside can be extracted. The pin that holds them in place must also be removed to allow the new pads to be installed: secure the new pads in the caliper, then reinstall the caliper onto the disc, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos