|
Do it yourself
| |||
| ||||
Model: Ktm Exc 300
In this brief guide, you will find instructions to remove and replace the thermostat of the KTM EXC 300 enduro bike, as well as the 125 and 250 models. First, place your bike on a stand and begin draining the coolant by disconnecting the thermostat hose; then disconnect the radiator pipe and undo the bolts securing the thermostat, removing it from the cylinder head circuit, as shown in the video. At this point, install the new original thermostat, topping up with new coolant!
Updated on 30 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Exc 300
In this guide, you will learn the main instructions on how to remove and replace the front tyre on the KTM EXC 300 enduro bike. First, place the bike…
Exc 300
In order to disassemble the engine of the KTM EXC 300, you need to loosen the screws that fix the piece to its housing in the central lower part of t…
Exc 300
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the suppo…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |